New Products

Diameter of flat area is 1-5/8". Diameter of hole drilled in flat area is 3/16". To install this ball knob, we recommend our #KS screw . , or our DES double ended screw for attachment purposes.  The screw is not included.  IMPORTED.   PLEASE NOTE -- THE FLAT IS 1-5/8", WHICH IS LARGER THAN OUR #105A. 

Dimensions: 2-3/4" Long x 7/16" Thick (at the thickest part). Narrowest part is 1/8" Thick. 

Dimensions: 1" Diameter x 3/16" Thick x 1/16" Hole Size. This wheel is not fully molded - flat on one side. You can glue two wheels to make one wheel! Use strong cement glue made for bonding metals. Holes can be drilled out slightly larger to fit your preferred screws or dowels. To take the shine off the wheel for a time worn look, soak the wheels overnight in vinegar or paint thinner and scrub...

Dimensions: 3-9/16" Tall x 1-1/8" Wide. This is a Second Quality item, will have minor flaws etc. Milled from birch or yellow maple wood in Maine, USA.

Size may vary - sold as is, no returns.  Outside diameter 17/32" to 1/2" +/- Limited to on hand quantity only.  Imported

This is a Second Quality item, will have minor flaws etc. Milled from birch or yellow maple wood in Maine, USA.

Based on our item #BUOY-SM   Buoy = 3'' Overall length (Made in Maine by a licensed lobster fisherman)  Key-chain = 2-1/4'' Long (imported)  Assembled only. 

Zinc Plated. Imported. 

These dowels are Second Quality and may have minor defects - mainly some minor roughness at the ends. We are only calling them seconds for that reason, as they are generally very good.  Buy one or buy them all at the same price of $.50 each. 

These dowels are Second Quality and may have minor defects - mainly some minor roughness at the ends. We are only calling them seconds for that reason, as they are generally very good.  Buy one or buy them all at the same price of $.50 each. 

These dowels are Second Quality and may have minor defects - mainly some minor roughness at the ends. We are only calling them seconds for that reason, as they are generally very good.  Buy one or buy them all at the same price of $.50 each. 

Our standard 3-1/2'' Shaker Peg in Hardwood Maple . Made in Maine. Beautiful.   While they last!     

Dimensions: 4-13/16'' Long x 4-3/8'' Tall x 1/8'' Thick Baltic Birch Plywood.

Dimensions: 7/8'' Tall x 9/16'' Diameter. This is a Second Quality item. There may be rough spots or natural wood discoloration.  Made in Maine, USA. 

Dimensions: 5/8" Diameter x 3/4" Tall x 1/4" Hole.  These are 2nd Quality.

A nice wooden cup. Believe it or not, these were used as a cement mixer body by some toy truck makers. These toy cement mixer trucks are now gone from the market and we have some of these wood cups left. These are milled from maple wood.  Dimensions: 2-7/32" Diameter x 2-11/16" Long. The hole is 1-1/2" Wide and 2-9/32" Deep.  Very good quality, although they are...

These Bowling Pins are 2nd quality with Minor blemishes.

Dimensions: 2-5/16'' Long with 3/8'' Head x 1/4'' Diameter Shaft with a 3/16'' Diameter x 3/8'' Long Tenon. Imported

These are milled in the USA!  Order mininum is 5 dowels.    

Yellow Star with a 5/16" Hole Thru.  Make a magic wand with a 5/16" dowel.  Be the star of a show!  Magic not included :-).   Made in the USA!

Minimum order quantity: 50 dowels. Milled in USA!  

Milled in Maine---Poplar.   Minimum order quantity: 100 dowels.    

Dimensions: 4-5/16" Wide x 2" Tall x 1/8" Thick. Minimum Order Quantity: 25 pieces. Please allow 2 weeks for delivery for this item - it is made to order, not kept in stock. Made in Maine.